Hole Cutter – Drill Powered
Login for Price
The adjustable circular hole cutter is the easiest to use. It requires a cordless or electric drill (not included), and will drill its own 1/8 inch center hole. The sliding/locking center pivot pin has a built in scale to cut precise holes from 2 to 12 inches in diameter.
- Additional Information
To properly clean some duct systems it may be necessary to “cut-in” to attach a negative air machine or to access areas for contact vacuuming. Air-Care offers 3 hole cutters that will work in 18 gauge or lighter steel.
|Dimensions||10 x 10 x 7 in|
Hose – Heavy Duty Blue 12 inch X 12.5 ft w/ Strap Collar0 out of 5
Hose – Light Duty Mylar 12 inch X 25 ft w/ Velcro Straps0 out of 5
For use with TurboJets
Flex-E Bristles – 18 inch Standard0 out of 5
.021″ Crimped, BLK – For Cobra & Drill Powered Cables With the Pancake Hub
Cable – 20 ft Drill Powered with 18 inch Brush0 out of 5
Drill not included – w/ 18 Standard Flex-E-Bristle Brush, .021 Crimped Bristles, BLK
Bristles – 12 inch DuctMaster/Flex-E-Bristles0 out of 5
.021″ Level, BLK
HEPA Back Pack Vacuum – Call Us For Your 2018 Pricing!0 out of 5
This HEPA Back Pack Vacuum is lightweight at 11 lbs with 11.5 amps of power pulling an impressive 150 CFM of airflow and 100 inches of static lift.
Hose – Light Duty Mylar 12 inch X 25 ft (hose only)0 out of 5
Brush – 18 inch DuctMaster – .032 inch Level Bristles – BLK0 out of 5
For the DuctMaster
Brush – 4 inch – Dryer Duct0 out of 5
(for Cobra IV/Dryer Ducts)
Hose – Heavy Duty Blue 12 inch X 25 ft w/ Strap Collar0 out of 5
For use with TurboJet