18 Gauge Shear, Drill Powered
Login for Price
The Drill-powered shear will cut straight or slight curves, as well as making 90 degree corners. It requires a half inch pilot hole to get started and is easily attached to your cordless or electric drill (not included).
- Additional Information
To properly clean some duct systems it may be necessary to “cut-in” to attach a negative air machine or to access areas for contact vacuuming. Air-Care offers 3 hole cutters that will work in 18 gauge or lighter steel.
|Dimensions||10 x 10 x 7 in|
12in Flex E Bristle Brush Standard .021in Cobra0 out of 5
12in Flex E Bristle Brush Standard .021in Cobra
Hose – Light Duty Mylar 12 inch X 25 ft w/ Velcro Straps0 out of 5
For use with TurboJets
Brush – 4 inch – Dryer Duct0 out of 5
(for Cobra IV/Dryer Ducts)
Brush – 18 inch DuctMaster – .032 inch Level Bristles – BLK0 out of 5
For the DuctMaster
Sidewinder Hose Assembly0 out of 5
The Sidewinder is the most versatile cleaning tool for all sizes of ducts made of metal, flex, duct board, and even internally insulated types.
Flex-E Bristles – 18 inch Standard0 out of 5
.021″ Crimped, BLK – For Cobra & Drill Powered Cables With the Pancake Hub
HEPA Back Pack Vacuum – Call Us For Your 2018 Pricing!0 out of 5
This HEPA Back Pack Vacuum is lightweight at 11 lbs with 11.5 amps of power pulling an impressive 150 CFM of airflow and 100 inches of static lift.
Dryer Duct Cable Repair Kit – Brush End0 out of 5
(5/16 inch Cable)
Hose – 2 inch x 35 ft w/ cuffs – Blue0 out of 5
For use with Vent Vac III
Hose – Light Duty Mylar 12 inch X 25 ft (hose only)0 out of 5