Duct Cleaning Procedure

What is the Air Duct Cleaning Process

For Professionals Contractors Only.

The following air duct cleaning steps are for a full service air duct cleaning. The process of air duct cleaning involves four steps:

  1. Clean the furnace/air conditioner.

After testing the system for proper operation, we will disconnect the power before opening the unit for safety. Next, vacuum the interior surfaces of the Furnace/Air Conditioner. Then clean the cooling coils with a HEPA vacuum and a coil cleaner, and clean the blower unit.

Step 1 of the duct cleaning process
  1. Clean the supply and return registers and grills.

Remove wall, ceiling and floor registers. Then wash register with Dynamite cleaner and rinse.

Step 2 of the duct cleaning process
  1. Clean the supply and return ducts.

Clean all air ducts using powerful air duct cleaning equipment. Decontaminate cleaned ducts with Soot Set duct sealant, and Odor Kill Deodorizer.

Step 3 of the duct cleaning process
  1. Install electrostatic air filter and odor control products.

Install Solid Odor Kill in the return to control odors for up to 3 months.

Step 4 of the duct cleaning process
For Businesses Only, Complete the Form
  • You can't view prices until you click the link in your email to activate your account.

  • This field is for validation purposes and should be left unchanged.
Get the FREE beginner's guide to Air Duct Cleaning.
Get The Guide