TURBOJET MODEL 4200A

Air Care constantly strives to improve the performance, convenience and efficiency of all its products and test them in the field for reliability and maneuverability. The Model 4200A Dual Motor Turbojet is the latest, most powerful portable negative air machine Air-Care has ever produced, yet it will even run on 15 AMP, fused circuits.

Both motors are 1.5 Horsepower, 3 phase, high efficiency units with individual variable speed inverters featuring Electronic Speed Processing (ESP) and ramp up starting to eliminate the power surge that most portable duct vacuums generate. Each motor can be independently set to run on either a 15 amp or a 20 amp circuit. Two independent circuits are required to run both motors. If only one circuit is available, one motor can be used to produce virtually the same pull as a single motor Turbojet.

The 4200A is the smallest dual motor negative air machines on the market today. The 4200 will handle large commercial air duct systems, but are small enough for residential use as well. 4200 feature non-marking wheels, built in stair-climber, upper handle rollers for horizontal use and to assist in loading into your service vehicle, with 16" & 12" inlets (included). The 3 stage filtration features a 200 micron reusable 1st stage bag filter, 2nd stage electrostatic air filter and a 3rd stage 23 3/8 x23 3/8 x 8 high density pleated Certified HEPA filter.

Item #CE4200

Specifications	Turbojet 4200A
Size	25.3" W x 29" D x 53" H
Weight	240 lbs.
Power Required	115 V 60 Hz @ 13-17 amps x 2
Power Connections	TWO 3-wire inlets w/two 20 amp breakers
Power Cord	Two 12 gauge x 50 Ft. power cords
Air Flow	5000 CFM free air/ 3500 CFM filtered
Static Pressure	5.0" W.G.
Attachment	12" x 12 1/2' light duty mylar hose assembly Includes: 12" x 12 1/2' hoses (2), hose clamps (4), hose coupler (1)
Exhaust	Exhaust Flange Kit (optional)
Filtration	3 Stage + 4th stage pre filter
Pre-Filter	Pellon vapor barrier
First Stage	24" x 24" x 8" washable "slide-in" filter
Second Stage	23 1/2" x23 1/2" x 1" 94% Electrostatic, permanent
Third Stage	23 3/8" x 23 3/8" x 8" certified HEPA
Operating Range	25-125 deg. F (-4 to 50 deg. C)
Construction	Aluminum reinforced with steel
Control Panel	Single plug-able panel w/pressure gauge, 2-Ammeters, 2-speed controls & 2-start/stop rocker switches
Blower	TWO-Backward Inclined
Motor & Inverter	TWO -1.5 HP 3 phase motors & 2 single phase to 3 phase inverters w/soft start & dual speeds
Finish	Textured powder coat

                                                               TURBOJET 4200 FEATURES
                                                               • Dual 3 phase 1.5 HP motors
                                                               • Dual blowers
                                                               • Backward inclined blowers
                                                               • Low speed 13 amp & high speed 17 amp operation
                                                               • One or both motors can be used
                                                               • 3-stage certified HEPA filtration
                                                               • Mini-pleat HEPA filter triples filter life
                                                               • Horizontal or Vertical operation
                                                               • Control panel located at the top of machine
                                                               • Aluminum construction with steel reinforcement
                                                               • Attractive, durable powder coat finsh
                                                               • Operates on 15 or 20 amp circuits
                                                               • Exhaust Flange Kit available
                                                               • Soft Start

"All Turbojets can be run horizontally for easy attachment to floor registers or to connect to basement ducts without taking them down stairs."

Two motor operation requires 2 independent circuits.

4200A Replacement Filters	Item #
1st stage 24"x24"x8" washable "slide-in" filter	F1960A
23 1/2" x 23 1/2" x 1" Electrostatic second stage filter	F2424
23 3/8" x 23 3/8" x 8" HEPA 3rd stage filter	F1953


4200A Accessories
Pogo Pole Hose Adapter, 12"	CE1630D
12" Vacuum Adapter plate for 12" Dia Hose	CE1513B
12" x 12 1/2' light duty mylar hose assembly: Includes: 12"x12 1/2' hoses (2), hose clamps (4), hose coupler (1)	CE1339A
12"x25' light duty mylar hose with clamps	CE1340A
12"x12"x12" Plenum Adapter	CE2299
Pellon moisture barrier pre-filter, 12/pkg	F1682
Exhaust Flange Kit 4200	CE1435
Foam Register Plugs, 14 pcs/pkg: 12"x12" (4), 8"20" (4), 8" x 8" (6)	CE1695