TURBOJET MODEL 1912

“ The upper filter section separates from the Motor/Blower section for ease of loading in smaller vehicles and ease of transport to the job site.”

The Turbojet 1912 is light weight with a single speed motor and backward incline fan. The vertical, cylindrical design gives the technician easy access in small homes, basements, stairways and mobile homes with enough pull to simultaneously clean supply and return ducts.

The upper cylinder contains the filters and detaches to be carried in the back seat of a normal car. The bottom cylinder contains the motor and blower and will fit in the rear hatch or trunk. With the patented coaxial connection, alignment pin and stabilizing latches, the Turbojet 1912 is a well balance dolly, that effortlessly crosses rough, smooth or even grassy areas.

Horizontal and vertical operation provide you with easy attachment to furnace plenums, floor duct, or ceiling supplies. In commercial buildings two Turbojets can be connected together with the optional plenum adapter (Item #CE2299) to provide twice the performance when needed for larger commercial jobs.

ACCESSORIES	Item#	Specifications	Turbojet 1912
Turbojet 1912 Replacement Filters		Size	22” dia. X 49”H
1st stage 16"x16"x8" washable, round filter	F1815A	Weight	96 lbs.
2nd stage, 14" OD x 8" ID x 18" H washable foam HEPA pre-filter	F1814B	Power Required	115 V AC, 60Hz, 13 amps, 1 phase
3rd stage, 14" OD x 8" ID x 18" H high efficiency pleated canister filter*	F1912	Power Connections	One, 3 wire inlet with dual 20 amp fuse
Turbojet 1912 Accessories		Power Cord	N/A
Pogo Pole hose adapter, 12”	CE1630	Air Flow	2500 CFM free air/ 2000 CFM filtered
12" x 12 1/2' light duty mylar hose assembly Includes: (2) 12" x 12 1/2 ' hoses, (4) hose clamps, (1) hose coupler	CE1339A	Static Pressure	4.8 inches W.G
12" x 25' light duty mylar hose with clamps	CE1340A	Attachment	12” x 12 1/2' light duty mylar hose assembly includes: 12" x 12 1/2' hoses (2), hose clamps (4), hose coupler (1)
12” Adapter plate	CE1513B	Filtration	4 stages when pre-filter used
Plenum Adapter to connect 2 Turbojets together 12x12x12	CE2299	Pre-Filter	Pellon moisture barrier
Pellon moisture barrier pre-Filter, 12/pkg	F1682	First Stage	16” x 16" x 8" washable, round filter
12" x 12", 26 gauge, galvanized steel (duct patches) 10/pkg	AC3002	Second Stage	14" OD x 8" ID x 18" H washable foam HEPA pre-filter
Foam Register Plugs, 14 pcs/pkg: 12" x 12" (4), 8" x 20" (4), 8" x 8" (6)	CE1695	Third Stage	14" OD x 8" ID x 18" H high efficiency pleated canister filter
		Operating Range	25 to 125 deg. F (-4 to 50 deg. C)
		Construction	Steel
		Controls	Power switch, 20 amp circuit breaker
		Blower	One backward inclined
		Motor	1.5 HP energy efficient
		Finish	Textured powder coat
		Warranty	3 Years